Ultrasensitive and ultrastretchable metal crack strain sensor based on helical polydimethylsiloxane

• Shangbi Chen,
• Dewen Liu,
• Weiwei Chen,
• Huajiang Chen,
• Jiawei Li and
• Jinfang Wang

Beilstein J. Nanotechnol. 2024, 15, 270–278, doi:10.3762/bjnano.15.25

• and a light-emitting diode (LED). When a tensile strain is applied, the light emitted by the LED is modulated by the strain sensor. The LED rapidly switched off when the sensor surpassed the critical strain threshold of the target. The switch-off of the LED could serve as an alarm signal, and the

Nanogenerator-based self-powered sensors for data collection

• Yicheng Shao,
• Maoliang Shen,
• Yuankai Zhou,
• Xin Cui,
• Lijie Li and
• Yan Zhang

Beilstein J. Nanotechnol. 2021, 12, 680–693, doi:10.3762/bjnano.12.54

• . Lee et al. proposed a based Hg2+ ion sensor based on ZnO nanowires and carbon nanotubes for detecting toxic pollutants [17]. The ZnO nanowire (NW) array acted as power source. When Hg2+ ions were detected, the system powered a light-emitting diode (LED). Li et al. designed a self-powered heavy metal

Walking energy harvesting and self-powered tracking system based on triboelectric nanogenerators

• Mingliang Yao,
• Guangzhong Xie,
• Qichen Gong and
• Yuanjie Su

Beilstein J. Nanotechnol. 2020, 11, 1590–1595, doi:10.3762/bjnano.11.141

• between. The undulated electrode serves as a spacer and also as an induction electrode for energy collection. Triggered by the steps of human walking, the open-circuit voltage and short-circuit current reach values up to 86 V and 6.2 μA, respectively, which is sufficient to light up 110 light-emitting

• diode (LED) bulbs. In addition, by integrating the u-TENGs with six electrode channels, a self-powered location-tracking system was developed. This walking energy harvesting device is flexible, durable, and feasible, regardless of the time of the day, season, climate, and weather, which makes it an

A few-layer graphene/chlorin e6 hybrid nanomaterial and its application in photodynamic therapy against Candida albicans

• Selene Acosta,
• Carlos Moreno-Aguilar,
• Dania Hernández-Sánchez,
• Beatriz Morales-Cruzado,
• Erick Sarmiento-Gomez,
• Carla Bittencourt,
• Luis Octavio Sánchez-Vargas and
• Mildred Quintana

Beilstein J. Nanotechnol. 2020, 11, 1054–1061, doi:10.3762/bjnano.11.90

• -Ce6) for the photodynamic treatment (PDT) of Candida albicans. We show that the FLG-Ce6 hybrid nanomaterial displays enhanced reactive oxygen species (ROS) generation compared with Ce6. The enhancement is up to 5-fold when irradiated for 15 min at 632 nm with a red light-emitting diode (LED). The

• materials as candidates for photosensitizers in PDT [31][32]. An FLG and Ce6 hybrid nanomaterial (FLG-Ce6) was used as the photosensitizer in combination with a red light-emitting diode (LED) array as the photoactivation light source. The conjugated system of graphene π-electrons improves the performance of

Influence of the epitaxial composition on N-face GaN KOH etch kinetics determined by ICP-OES

• Markus Tautz,
• Maren T. Kuchenbrod,
• Joachim Hertkorn,
• Robert Weinberger,
• Martin Welzel,
• Arno Pfitzner and
• David Díaz Díaz

Beilstein J. Nanotechnol. 2020, 11, 41–50, doi:10.3762/bjnano.11.4

• progress in small time increments with high precision. Thereby, the disadvantages of other techniques such as determination of weight loss or height difference were overcome, achieving high accuracy and reproducibility. Keywords: etching; GaN; ICP-OES; KOH; LED; Introduction The light emitting diode (LED

Green fabrication of lanthanide-doped hydroxide-based phosphors: Y(OH)₃:Eu³⁺ nanoparticles for white light generation

• Tugrul Guner,
• Anilcan Kus,
• Mehmet Ozcan,
• Aziz Genc,
• Hasan Sahin and
• Mustafa M. Demir

Beilstein J. Nanotechnol. 2019, 10, 1200–1210, doi:10.3762/bjnano.10.119

• efficient technologies [1][2][3][4][5]. Today, light-emitting diode (LED)-based white light generation plays a role in both academic and industrial applications. To obtain white light through LED-based configurations, either all three primary colors (red–green–blue (RGB)) can be integrated individually via

Towards rare-earth-free white light-emitting diode devices based on the combination of dicyanomethylene and pyranine as organic dyes supported on zinc single-layered hydroxide

• Jeff L. Nyalosaso,
• Rachod Boonsin,
• Pierre Vialat,
• Damien Boyer,
• Geneviève Chadeyron,
• Rachid Mahiou and
• Fabrice Leroux

Beilstein J. Nanotechnol. 2019, 10, 760–770, doi:10.3762/bjnano.10.75

• -emitting diode (LED); pyranine; zinc hydroxyacetate; Introduction Light-emitting diode (LED) devices are the most developed lighting systems today. 95% of LEDs found on the market generate white light by combining the blue light of a semiconductor diode (GaN or InGaN) with the broad yellow emission of the

• stacked upon each other and placed above a blue LED lead to white-light emission with suitable photometric parameters for applications in lighting or display devices: colour temperature of 5409 K and colour rendering index (CRI) of 81. Keywords: dicyanomethylene (DCM); hybrid luminescent films; light

Optimization of the optical coupling in nanowire-based integrated photonic platforms by FDTD simulation

• Nan Guan,
• Andrey Babichev,
• Martin Foldyna,
• Dmitry Denisov,
• François H. Julien and
• Maria Tchernycheva

Beilstein J. Nanotechnol. 2018, 9, 2248–2254, doi:10.3762/bjnano.9.209

• emitting diode (LED) and a nanowire photodetector connected with a waveguide is proposed. The light coupling efficiency from the LED to the detector is optimized as a function of the geometrical parameters of the system using the finite difference time domain simulation tool Lumerical. Starting from a

• , Russia LPICM-CNRS, Ecole Polytechnique, Université Paris-Saclay, 91128 Palaiseau, France, Saint Petersburg Electrotechnical University "LETI", ul. Professora Popova 5, 197376 Saint Petersburg, Russia 10.3762/bjnano.9.209 Abstract The optimized design of a photonic platform based on a nanowire light

A visible-light-controlled platform for prolonged drug release based on Ag-doped TiO₂ nanotubes with a hydrophobic layer

• Caihong Liang,
• Jiang Wen and
• Xiaoming Liao

Beilstein J. Nanotechnol. 2018, 9, 1793–1801, doi:10.3762/bjnano.9.170

• yellow fluorescent light-emitting diode (LED) lamp irradiation (λ > 450 nm). Subsequently, the treated TNTs arrays were soaked in 70 mL 0.1 M Zn(AC)2 solution and then the samples were treated by hydrothermal reaction in 0.1 M Zn(Ac)2 solution for 3 h at 200 °C to fabricate the Zn-loaded Ag-TNTs, which

• (3.5 h, 7.5 h, 12 h, 36 h, 96 h, 192 h and 408 h) and 5 mL of fresh PBS was added to compensate for the solution. The samples were collected periodically for up to 17 days. During the whole process, half of tubes with NDM and half without NDM were irradiated by a yellow fluorescent light-emitting diode

• (LED) lamp without ultraviolet light (<450 nm), while the other half of tubes with NDM were kept in the dark. Materials characterization The surface morphology and microstructure of the fabricated samples were investigated by scanning electron microscopy (SEM, Hitachi S4800, Japan) and X-ray

Electro-optical interfacial effects on a graphene/π-conjugated organic semiconductor hybrid system

• Karolline A. S. Araujo,
• Luiz A. Cury,
• Matheus J. S. Matos,
• Thales F. D. Fernandes,
• Luiz G. Cançado and
• Bernardo R. A. Neves

Beilstein J. Nanotechnol. 2018, 9, 963–974, doi:10.3762/bjnano.9.90

• electrostatic force microscopy (EFM) [65][66] and scanning Kelvin probe microscopy (SKPM) [67] experiments were carried out using a white light emitting diode (LED) source. ScanAsyst – Air (bare Si tip), HQ:NSC18/Cr-Au (Au-coated tip) and HQ:CSC37-CrAu (Au-coated tip) cantilevers from Bruker and MikroMasch were

Optical orientation of nematic liquid crystal droplets via photoisomerization of an azodendrimer dopant

• Sergey A. Shvetsov,
• Alexander V. Emelyanenko,
• Natalia I. Boiko,
• Alexander S. Zolot'ko,
• Yan-Song Zhang,
• Jui-Hsiang Liu and
• Alexei R. Khokhlov

Beilstein J. Nanotechnol. 2018, 9, 870–879, doi:10.3762/bjnano.9.81

• droplet surface as the undoped NLC (Figure 2a). The director distribution of NLC droplets is determined by planar surface conditions in glycerol. Thus, the presence of polymer additive does not disturb the orientational structure of the droplets in the absence of light-emitting diode (LED) illumination

Light-induced magnetoresistance in solution-processed planar hybrid devices measured under ambient conditions

• Sreetama Banerjee,
• Daniel Bülz,
• Danny Reuter,
• Karla Hiller,
• Dietrich R. T. Zahn and
• Georgeta Salvan

Beilstein J. Nanotechnol. 2017, 8, 1502–1507, doi:10.3762/bjnano.8.150

• photoswitching, I–V characteristics and magnetoresistance measurements was performed immediately after the sample preparation. The total measurement time was about 1 h. The schematic diagram of the experimental set-up is shown in Figure 1. The entire sample surface was illuminated with a white light emitting

• diode (LED), with an emission ranging from 400 to 700 nm for the measurements of the photocurrent and of the magnetoresistance. The measurements were performed at room temperature (ca. 25 °C) and the ambient humidity was maintained at (20 ± 5)%. The electrical measurements were conducted using a

Superluminescence from an optically pumped molecular tunneling junction by injection of plasmon induced hot electrons

• Kai Braun,
• Xiao Wang,
• Andreas M. Kern,
• Hilmar Adler,
• Heiko Peisert,
• Thomas Chassé,
• Dai Zhang and
• Alfred J. Meixner

Beilstein J. Nanotechnol. 2015, 6, 1100–1106, doi:10.3762/bjnano.6.111

• ]. The situation here is analogue to a light emitting diode (LED) consisting of a pn-junction. When a voltage is applied to the anode lead of the LED that is more positive than the voltage applied to the cathode lead by at least the forward voltage drop of the LED, a current flows and results in emitted

A nano-graphite cold cathode for an energy-efficient cathodoluminescent light source

• Alexander N. Obraztsov,
• Victor I. Kleshch and
• Elena A. Smolnikova

Beilstein J. Nanotechnol. 2013, 4, 493–500, doi:10.3762/bjnano.4.58

• principles of nature, the energy efficient generation of light requires the usage of extremely toxic materials (mercury, heavy metals and others). This leads to the necessity of expensive and laborious efforts to dispose of the mercury-based fluorescent devices and the semiconductor-based light emitting

• diode (LED) lamps (see, e.g., [1][2]). Moreover, the spectral characteristics of the light produced by these fluorescent and LED lamps are often not perceived as pleasing in contrast to incandescent lamps. But incandescent bulbs convert only 5% of the consumed energy into light and are thus considered

Reduced electron recombination of dye-sensitized solar cells based on TiO₂ spheres consisting of ultrathin nanosheets with [001] facet exposed

• Hongxia Wang,
• Meinan Liu,
• Cheng Yan and
• John Bell

Beilstein J. Nanotechnol. 2012, 3, 378–387, doi:10.3762/bjnano.3.44

• spectroscopy (EIS) of the DSCs was measured in the frequency range of 50,000–0.1 Hz at room temperature by a Versa-stat 3 electrochemical workstation (Princeton Applied Research). The EIS measurement was carried out under illumination, which was provided by a light emitting diode (LED, 627 nm) at open-circuit

Determination of object position, vortex shedding frequency and flow velocity using artificial lateral line canals

• Adrian Klein and
• Horst Bleckmann

Beilstein J. Nanotechnol. 2011, 2, 276–283, doi:10.3762/bjnano.2.32

• silicone bars was comparable to the density of water to ensure that only the motion of the fluid affected the bending of the bar. For the detection of canal fluid motion, one end of each silicone bar was illuminated with an infrared light emitting diode (LED, SFH420). Light, leaving the opposite end of the